尿裤打孔机，面层打孔机，全伺服打孔印花分切机，打孔机

HHL-DK1300S-B 全伺服无纺布打孔压花机

一 概述

    HHL-DK1300S-B型无纺布打孔压花机，设备主要适用于纸尿裤、尿片面层加工及无纺布分切。该机的放料架与收料架均采用独立伺服电机控制。并配有光电自动跟踪纠偏系统，,自动张力控制系统，采用高精度台湾进口模具加工而成，精密丝杆控制位置.该机具有打孔及分切速度快，能耗低，空气污染小等特点。

   本机由布放卷单元、打孔单元、在线分切单元、收卷单元、电气控制系统及相应气动控制仪表等组成**次的硬件、完善的软件配置，满足国情的性能和合理价位。采用先进的“集中式数控系统”，具有自动化程度高、功能齐全、性能稳定可靠、操作简便及生产效率高等优点。

    本机型显著特点

⊙**高机械速度： 90m/min

⊙采用进口机的标准配置， 二级浮辊式全伺服电机联动张力控制系统.放卷采用超低摩擦气缸摆动辊检测，具有高精度，灵敏度的张力控制。收卷采用高精度张力检测器，具有高精度高灵敏度的张力控制。

 ⊙异地加减速及速度自动控制、张力与速度实行联动控制，加减速稳定。

⊙可选择式加减速曲线、加减速是否响铃、计米达到设定值是否自动减速停机等个性化功能。充分体现科技以人为本的人性化设计理念

⊙采用日本三菱Fx3U系列PLC集中控制、采色人机界面汉显操作系统。机、电、光、气一体化设计，具有完善的安全保护功能。

二、主 要 性 能             

  主 要 技 术 参 数 

⊙基材宽幅：   1200mm

⊙整机机械总功率  ： ~21kw

⊙分切卷取边缘整齐：  +1mm

⊙热风无纺布及仿粘布打孔速度： 6-80m/min（打孔速度取决于所用基材的特性、厚度均匀性特性及其它）

⊙机械速度 ：  90/min

⊙加热方式 ： 油加热 

⊙定型方式 ：    冷却水5度到常温 

⊙温度控制 ：   50-200 度/+-1 度

⊙验收速度 ：   70m/min

⊙收放卷**大直径 ：  Φ1000mm

⊙纸筒**大长度 ：   1200mm

⊙纸筒规格 ：        内径Φ76mm×外径Φ92mm

⊙收放卷气胀轴外径 ：Φ74mm   各配两条 

⊙导辊长度：        1300mm

⊙打孔有效宽度 ：    1200mm

⊙张力控制范围：   3~25kg/全幅宽 

⊙张力控制精度 ：   ±0.5kg/全幅精度

HHL-DK1300S-B Full Auto -service Non-woven Pin-hole Embossing Machine

一Summary

    HHL-DK1300S-B Type Non-woven Pin-hole Embossing Machine, main working in the top sheet of diaper, diaper pad and Non-woven cutting. The winding rack and rewinding race are controlled by Auto-service electric machinery, and photoelectric。Auto tracing correct system, auto pulling control system.. The process used Taiwanese’s high accuracy mold, high precision pole control position. The machine have such features: fast speed in pin-hole and cutting, low energy,and low air pollution.

The machine is compose of winding unit, pin-hole unit, line-cutting unit,re-winding unit, electric control system and pneumatic instrument. High level hardware, perfect software configuration,satisfy capability and reasonable price. The machine have such advantages : high level of auto-service, multi-functional ,stable property, easy -to -used and high production eficiency, which use advanced “ concentration CNC system”.

   Main Characteristic

⊙ Higt speed：90m/min

⊙ Advantage standard configuration: Two grade float roller with full auto-service electric machinery combine with pulling control system. The winding rack detected by extra-lowest friction cylinder roller, which have high measuring precision and high sensitive pulling control. The rewinding using high measuring precision pulling detect machinery, have high measuring precision and high sensitive pulling control.

⊙ Variance accel-decel and auto control speed, pulling combine with speed control, accel-decel stable.

⊙ Alternative accel-decel curve, acel-decel with alarm, the machine whether would reduce speed and stop machine when the measurement reach set point value,which several kind of individuation function showing our individuation design idea--“ Human Technology “

⊙ Adopt PLC intent control from Mitsubishi FX3U,colorful HMI operating system. Electromechanical integration design, have full safety protect function.

二      二 Main  performance              

  1. Main technical data-sheet

⊙material width：                  1200mm

⊙Total output)：         ~21kw

⊙cutting edge error)：  +1mm

⊙pin-hole speed ：                6-80m/min（based on the feature of materials）

⊙machine speed ：                            90/min

⊙heating mode：           oil

⊙finalizing mode：    5 to ordinary

⊙Temperature ：   50-200 度/+-1 度

⊙Acceptance speed ：   70m/min

⊙max OD：  Φ1000mm

⊙max length of inner roll：   1200mm

⊙Specs inner roll：        内径Φ76mm×外径Φ92mm

⊙OD winding and re-winding)：Φ74mm    Two pieces 

⊙length of roller ：        1300mm

⊙valid width ：    1200mm

⊙range of pulling control：   3~25kg/全幅宽 (full width )

⊙pulling control precision：   ±0.5kg/全幅精度(full width)