| 通道数 | 4.0 |
|---|---|
| 显示模式 | 屏幕显示 |
| 最大输入 | 1 MΩ 400 V max (DC + Peak AC ≤ 10 Khz) 50 Ω 5 VV |
| 量程 | 1mV-10VV/div |
| 电源电压 | 90 - 264 VAC 45 HZ - 66 HzV |
| 外形尺寸 | 291.7 mm x 399.4 mm x 131.31 mmmm |
| 重量 | 5.86kg |
| 品牌 | 力科LECROY |
| 型号 | HDO4022 HDO4024 HDO4054 |
| 加工定制 | 否 |
| Vertical System | |
| Bandwidth | 500 MHz |
| Rise time | 700 ps |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz |
| Input Impedance | 1 MΩ ±2.0% || 15 pF, 50 Ω ±2.0% |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage | 1 MΩ: 400 V max (DC + Peak AC ≤ 10 Khz), 50 Ω: 5 VRMS |
| Channel-Channel Isolation | ≥ 24 dB |
| Vertical Resolution | 12-bits |
| Sensitivity | 1 MΩ: 1 mV/div - 10 V/div 50 Ω: 1mV/div - 1 V/div |
| DC Gain Accuracy | ±(0.5%) Full Scale, offset at 0 V |
| Offset Range | 50Ω +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-10V: 20mV/div-1V/div 1MΩ +/-1.6V: 1mV/div-4.95mV/div +/-4V: 5mV/div-9.9mV/div +/-8V: 10mV/div-19.8mV/div +/-16V: 20mV/div-100mV/div +/-80V: 102mV/div-198mV/div +/-160V: 200mV/div-1V/div +/-400V: 1.02V/div-10V/div |
| Horizontal System | |
| Time/Division Range | 20 ps/div - 10000 s/div |
| Clock Accuracy | ±2.5ppm for 5 to 40C + 1.0ppm/year from calibration |
| Trigger and Interpolator Jitter | 3.5 ps (rms) |
| Acquisition System | |
| Single-Shot Sample Rate/Ch | 2.5 GS/s |
| Equivalent Sample Rate | 125 GS/s |
| Memory | 25 Mpts/Ch on 2 Ch 12.5 Mpts/Ch on 4 Ch |
| Acquisition Modes | |
| Averaging | Up to 1,000,000 |
| Peak Detect | na |
| Interpolation | Linear, Sin x/x |
| Enhanced Resolution | Up to 15 bits |
| Sequence Mode | Up to 10,000 segments |
| Triggering System | |
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/10, AC Line |
| Coupling Mode | AC, DC, LF Rej, HF Rej |
| Pre-trigger Delay | 0-100% of full scale |
| Post-trigger Delay | 0-10,000 Divisions |
| Hold-off by Time or Events | 2ns up to 20s |
| Internal Trigger Range | ±4.1 Divisions |
| Trigger Sensitivity | 0.9 division: 10 MHz 1.0 divisions: 200 MHz 1.5 divisions: 250 MHz 2.0 divisions: 500 MHz |
| External Trigger Sensitivity | 0.9 division: 10 MHz 1.0 divisions: 200 MHz 1.5 divisions: 250 MHz 2.0 divisions: 500 MHz |
| External Trigger Input Range | Ext: ±0.4 V, EXT/10: ±4.0 V |
| Display | |
| Type | Color Touch Screen 12.1" TFT-LCD |
| Resolution | 1280 x 800 |
| Grid Styles | YT, XY |
| Trigger Types | |
| Standard Triggers | Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
| Optional Advanced Triggers | na |
| Optional Serial Data Triggers | I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, SENT, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, USB-HSIC, MIPI D-PHY, DigRF3G |
| Internal Storage | |
| Waveform Storage | 4 memory waveforms plus internal HDD |
| Setup Storage | 6 setups |
| Math | |
| Number of Math Traces | 2 |
| Standard Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root, Trend, Zoom |
| Optional Math Functions | na |
| Measurements | |
| Number of Measurements Displayed | 8 |
| Measurement Parameters | Ampltidue, Area, base, Delay, Delta Period @ Level, Delta Time @ Level, Duty Cycle, Duty @ Level, Edge @ Level, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Frequency @ Level, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Period @ Level, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Time @ Level, Top, Width+, Width- |
| Probes | |
| Probes | Qty. (4) ÷10 Passive Probes |
| Scale Factors | Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000) |
| Calibration Output | 1 kHz square wave, 1.0 Vp-p, output to probe hook |
| Interface | |
| GPIB Port (optional) | 1 (optional) |
| USB (Device) | 1 |
| Ethernet Port | 1 |
| USB (Host) | 6 |
| Serial Port | 0 |
| Power Requirements | |
| Voltage | 90 - 264 VAC, 45 HZ - 66 Hz 90 - 132 VAC, 380 HZ - 420 Hz |
| Max. Power Consumption | 330 VA |
| Environmental and Safety | |
| Temperature (Operating) | 5 °C to 40 °C |
| Temperature (Non-Operating) | -20 °C to 60 °C |
| Humidity (Operating) | 80% RH, 31 °C 50% RH, 40 °C |
| Humidity (Non-Operating) | 95% RH |
| Altitude (Operating) | 3,048 m max at <=30C |
| Altitude (Non-Operating) | 12,192 m |
| Physical Dimensions | |
| Dimensions (HWD) | 291.7 mm x 399.4 mm x 131.31 mm (11.48" x 15.72" x 5.17") |
| Weight | 5.86 kg (12.9 lbs) |
| Warranty and Service | |
| Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services. |
长沙泰克示波器 长沙泰克电源 长沙力科示波器 长沙力科电源 长沙安捷伦示波器 长沙力科电源 长沙安捷伦示波器 长沙安捷伦电源 长沙福禄克万用表 湖南福禄克万用表 高压探头 电流探头 湖南泰克示波器 湖南泰克电源 湖南力科示波器 湖南力科电源 湖南安捷伦示波器 湖南力科电源 湖南安捷伦示波器 湖南安捷伦电源 高压探头 电流探头
一、产品简介
HDO4000系列示波器应用Teledyne LeCroy的HD4096 技术，结合长存储深度、紧凑轻巧的结构设计、12.1”多点触摸显示屏和强大的调试软件工具，提供给用户精确测量和快速调试的理想示波器。示波器内置的WaveScan波形搜索和查找工具、LabNotebook 报告生成工具、历史模式等，帮助确认和隔离问题信号，为快速解决电路故障提供最佳解决方案
二、产品特点及详细参数
● 12-bit ADCs 垂直分辨率，增强分辨率模式下达到15-bit ● 200MHz, 350MHz, 500MHz, 1GHz 带宽分布 ● 长存储-最高至50Mpts/通道 ● 12.1”触摸显示屏，1280×800分辨率 ● 多语言用户界面 ● WaveScan-高级搜索和查找工具 ● LabNotebook 归档和报告生成工具 ● 历史回放模式-波形回放和测量 ● 专业的频谱分析软件 ● 功率信号分析软件包 ● 串行数据触发和解码 HD4096 高分辨率技术 HD4096 高分辨率技术包含高采样率的ADCs，高信噪比的前置输入放大器和低噪声的系统架构。使用HD4096 技术的示波器可以精确采集和测量高达1GHz带宽、高采样率和比传统8-bit示波器高达16倍的垂直分辨精度。 长存储深度 最高至 50 Mpts 存储深度的HDO4000系列高分辨率示波器可以高精度的捕获大量的数据信息，以作为后期处理的依据。结合2.5GS/s和 50 Mpts存储深度的架构令您在长时间采集和快速脉冲捕获都游刃有余。 超 大 1 2 . 1”触 摸 屏 幕 HDO4000上使用了12.1”超大的触摸屏设计，使示波器上复杂的用户操作界面已经成为了过去。同时示波器上的用户界面专为触摸屏幕和鼠标操作而设计，而使示波器的操作变得异常简单，即使没有使用过力科示波器的用户也能够轻松上手！因为不论是通道、时基、触发还是自动化测试都可以一触完成！ 更为灵巧的尺寸
您一定难以想象如此高性能的仪器还能够拥有纤细的身材，拥有1 2 . 1”超 大 屏 幕 的 同 时只保 持了 5”的仪 器深 度 和 如 此便 携的 体 积。同时，HDO4000 创新性的外观工业设计能够保持 4 种不同的仪器倾斜位置和视角，您可以随心所欲将它摆在实验室的任何位置。
139 0623 4308