| 加工定制 | 是 |
|---|---|
| 类型 | 电阻型火花塞 |
| 电极材质 | 铱金火咀 |
| 缸径 | 0（mm） |
| 火花塞间隙 | 0.33（mm） |
| 产地 | 湖南 |
| 电阻值 | 1-5KΩ |
| 对边 | 22.2 |
| 绝缘电阻 | 0 |
| 螺纹尺寸 | M18X1.5 |
| 耐电压性 | 35kv |
| 配件编号 | R10P3 |
| 突出型 | 多电极 |
| 旋合长度 | 20.6 |
| 品牌 | 德控动力 |
德控DELCON工业火花塞用于发电站的燃气发电机组。选择德控DELCON工业火花塞替代进口，终端用户可节省的相当可观的维护费用，经销商可以获得许多新的客户和销售机会。
无论是应用在污水处理、垃圾填埋和医院等公用事业，还是小区供热，都需要工业火花塞来点燃天然气或者污水处理气、发酵沼气、垃圾填埋气、煤层瓦斯气，从而实现供电、供热和供热水。
德控DELCON工业火花塞分为两种，一种为大型的透平涡轮发动机配套，一种为中小型6至20缸活塞式燃气发动机配套。发电机组的特征是在停机维护前，不允许故障停机，这**要求火花塞无论是在设计、制造还是原材料方面具有非常好的可靠性。德控DELCON工业火花塞在这些方面的优势，吸引了国内外大批使用通用电气GE、卡特皮勒CAT、道依茨DEUTZ、颜巴赫JENBACHER、高斯科尔GUASCOR等工业发电机的**客户。
DELCON Heavy Duty – special spark plug for stationary gas operated industrial engines. When you choose the DELCON Heavy Duty range of products, end users can save lots of maintenance cost and distributors can open up whole new group of customers and ensure additional sales possibilities.
Whether they are used in communal installations (for example purification plants, landfills or hospitals) or as more recently in district heating facilities for residential houses – everywhere that natural gas or waste products such as sewer gas, fermentation gas, landfill gasses and coal mine gas are burned using district heating central plants, industrial spark plugs are in use and play their part in reclaiming current, hot water and heat.
There are 2 types of heavy Duty spark plugs. DELCON plugs serve for Turbine Generators with high power output, also serve for engines with 6 to 20 cylinders .To master the non-stop operation that is most in demand, which is only interrupted for maintenance tasks, and at the same time to stand up to the extremely long intervals between replacements, DELCON Heavy Duty industrial spark plugs are manufactured of high quality materials that are extremely resistant to combustion. This attracts lots of customers who are using generators by GE, JENBACHER, CATERPILLAR, DEUTZ, GUASCOR etc.
火花塞拆装注意事项
·拔下高压线接头时应轻柔，操作时不可用力摇晃火花塞绝缘体，否则会破坏火花塞密封性能。
·发动机冷却后方可拆卸，当旋松所要拆卸的火花塞后，用一根细软管逐一吹净火花塞周围的污物，以防火花塞旋出后污物落入燃烧室内。
·螺丝周围、火花塞电极和密封垫必须保持清洁，干燥无油污，否则会引发漏电、漏气、火花减弱等故障。
·安装时，先用套筒将火花塞对准螺孔，用手轻轻拧入，拧到约螺纹全长的1/2后，再用加力杠杆紧固。若拧动时手感不畅，应退出检查是否对正螺口或螺纹中有无夹带杂质，切不可盲目加力紧固，以免损伤螺孔，殃及缸盖，特别是铝合金缸盖。
·应按要求力矩拧紧，过松会造成漏气，过紧使密封垫失去弹性，同样会造成漏气。锥座型火花塞由于不用密封垫，遵守拧紧力矩尤显重要。
工业火花塞：
道依茨、MWM机组火花塞
S-R6A15
S-R6A16
S-R6A12
CAT、瓦克夏、高斯卡尔等机组火花塞：
R5B12-77
R6GC1-77
颜巴赫机组火花塞：
R10P3
R10P7
R9B12-77
产品包装：
工业火花塞
139 0623 4308