供应无锡恒通1焊接设备

Welding manipulators(column and boom) are a kind of widely-used and high-automated auxiliary equipment in welding industry. Through the ratation of column and retraction of boom, welding manipulator meets welding requierments of cylinders with different sizes. Welding head is fixed at one end of manipulator to carry out automatic welding. This kind of welding manipulator could also be operated in match with welding rotator(turning roll) to carry out circumferential and longitudinal welding of inside and outside seam, which has got extensive application in bolier, Petrochemical, Shipbuilding and steel structure industries.

Structure : fixed type, fixed with rotation and movable type.

Both column and boom are cold-blended and go through annealing treatment.

There is anti-falling device to ensure the safety of boom lifting.

Boom retracting adopts VFD, being stable and reliable.

X-Y slide is fixed on one end of boom, which can be controlled by hand control panel.

Control roller bears eccentric shaft, which can decrease clearance between roller and rail.

Column rotation could be recognized by manual operation or electric drive.

Control unit includes: electric control board and hand control panel.

Optional: Trolley, Director chair or platform, dragchain, seam tracking and monitor system, and flux recovery system.

焊接操作机是一种应用广泛、自动化程度高的一种焊接辅助设备，它通过横臂的升降、伸缩和立柱的回转，可满足不同工件的焊接需要。本设备的横臂前端需配备焊机，实现自动焊接。该设备还可以与焊接滚轮架组合成焊接中心，可实现圆筒形金属结构件的内外环缝和纵缝的自动焊接，广泛应用于锅炉、石化、造船、汽车、钢结构等行业。本焊接中心结构先进、功能齐全、控制灵活、操作方便，是提高焊接质量和实现焊接自动化的理想设备。

①焊接操作机结构形式分为：固定式，固定带回转式，移动带回转式。

②立柱和横臂均采用冷弯焊接结构，整体折边成型，并经退火处理后精加工，具有较好刚性及强度。

③为安全起见，横臂升降装置配有意外防坠落装置，采用棘条棘爪结构。

④横臂伸缩采用变频调速，稳定可靠。

⑤横臂前端配有十字微调结构，可通过手控盒调节。

⑥八只导向轮均采用偏心轮结构形式，在安装调试时，可以调节偏心轴从而调节对导轨的松紧，调整结束后，通过双级螺母锁紧。

⑦立柱回转分为电控箱和手工盒两部分。

⑧可选项：移动台车，载人座椅和平台，拖链走线，焊缝跟踪和监视系统，焊剂输送回收系统。